Technical Data
BMW ALPINA B5 BITURBO Saloon AWD
Engine
| Cylinders | V8 90° |
|---|---|
| Capacity (cc) | 4395 |
| Bore (mm) | 89,0 |
| Stroke (mm) | 88,3 |
| Compression ratio (:1) | 10,0 |
| Max output (kW (hp) / rpm) | 447 (608) / 5750 - 6250 |
| Max torque (Nm / 1/min) | 800 / 3000 - 5000 |
| Engine management | BOSCH DME 8.8.0 |
| Fuel type | 98-octane |
| Emissions classification | Euro 6d-TEMP |
Performance
| Acceleration 0-100 km/h (s) | 3,5 |
|---|---|
| Top speed (km/h) | 330 |
Fuel consumption *
| Urban (l/100km) | 15,4 |
|---|---|
| Extra-urban (l/100km) | 8,7 |
| Combined (l/100km) | 11,1 |
| CO2 emissions combined (g/km) | 254 |
| CO2 efficiency | F |
Transmission
| Type | 8-Speed Sport-Automatic ZF 8HP75 SWITCH-TRONIC incl. single-cylinder fade-out |
|---|---|
| 1st | 5,00 |
| 2nd | 3,20 |
| 3rd | 2,14 |
| 4th | 1,72 |
| 5th | 1,31 |
| 6th | 1,00 |
| 7th | 0,82 |
| 8th | 0,64 |
| Final drive ratio | 2,81 |
Wheels and tyres
| Standard wheels and tyres | ALPINA CLASSIC 20" |
|---|---|
| Front | 8,5 x 20 255/35 ZR20 |
| Rear | 10 x 20 295/30 ZR20 |
Dimensions
| Length (mm) | 4956 |
|---|---|
| Width (mm) | 1868 |
| Height, unladen (mm) | 1466 |
| Wheelbase (mm) | 2975 |
| Track, front (mm) | 1611 |
| Track, rear (mm) | 1596 |
| Luggage capacity (l) | 530 |
| Fuel tank capacity (l) | 68 |
Weight
| Unladen (EU) (kg) | 2015 |
|---|---|
| Max permissible (kg) | 2470 |
| Permitted load (kg) | 530 |
| Max axle load, front (kg) | 1230 |
| Max axle load, rear (kg) | 1325 |
| Max trailer load, braked (kg) | 2000 |
| Max trailer load, unbraked (kg) | 750 |
Efficiency-Class
Determined on the basis of the measured CO2 emissions taking into account the mass of the vehicle.
New test procedure WLTP
Stated fuel consumption and CO2 emissions are measured pursuant to EU Regulation 715/2007 in its applicable version. From 1st of September 2018 the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) has replaced the New European Driving Cycle (NEDC). Regardless of the applied test procedure, it is currently still mandatory to state fuel consumption and CO2 emissions according to NEDC, hence stated values are determined based on the WLTP test procedure and are converted to NEDC for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that stated here. The provision of additional fuel consumption and CO2 emissions as determined according to WLTP is currently voluntary until their provision becomes mandatory by law.
Further information on specific fuel consumption and CO2 emissions of new passenger cars is provided by the ‚Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen‘ which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT) or online https://www.dat.de/co2/.