BMW ALPINA B5

Technical Data

BMW ALPINA B5 Saloon AWD

Engine

Cylinders V8
Capacity (cc) 4395
Bore (mm) 89.0
Stroke (mm) 88.3
Compression ratio (:1) 10.5
Max output (kW (hp) / rpm) 457 (621) / 5000 - 6500
Max torque (Nm / 1/min) 800 / 2000 - 5000
Engine management BOSCH DME 8.8T
Fuel type Super Plus
Emissions classification Euro 6d-ISC-FCM

Performance

Acceleration 0-100 km/h (s) 3.4
Top speed (km/h) 330 **

Fuel consumption

Urban (l/100km) 15.9
Extra-urban (l/100km) 8.3
Combined (l/100km) 11.1
CO2 emissions combined (g/km) 253
CO2 efficiency F

Transmission

Type 8-Speed Sport-Automatic ZF 8HP76 SWITCH-TRONIC
1st 5.00
2nd 3.20
3rd 2.14
4th 1.72
5th 1.31
6th 1.00
7th 0.82
8th 0.64
Final drive ratio 2.81

Wheels and tyres

Standard wheels and tyres ALPINA CLASSIC 20"
Front 8.5 x 20" 255/35 ZR20
Rear 10 x 20" 295/30 ZR20

Dimensions

Length (mm) 4978
Width (mm) 1868(2126)
Height, unladen (mm) 1466
Wheelbase (mm) 2975
Track, front (mm) 1611
Track, rear (mm) 1596
Luggage capacity (l) 530
Fuel tank capacity (l) ca. 68

Weight

Unladen (EU) (kg) 2055
Max permissible (kg) 2520
Permitted load (kg) 540
Max axle load, front (kg) 1255
Max axle load, rear (kg) 1325
Max trailer load, braked (kg) 2000
Max trailer load, unbraked (kg) 750


** In combination with ALPINA CLASSIC 20" wheel / tyre combination reduced top speed by approximately 3 km/h.


BMW ALPINA B5:                                                     Saloon                             Touring
Fuel consumption, combined (WLTP):                     11.6 l/100km                    12.0 l/100km
CO2 emissions combined (WLTP):                           263 g/km                         272 g/km

EU tyre label

EU tyre label = fuel efficiency class / wet grip class / external rolling noise class, external rolling noise value

For more detailed information, please click here:
EU tyre labels - information according to Regulation (EU) 2020/740
www.alpina-automobiles.com/tyrelabel

New test procedure WLTP

Stated fuel consumption and CO2 emissions are measured pursuant to EU Regulation 715/2007 in its applicable version. From 1st of September 2018 the Worldwide Harmonized Light Vehicles Test Procedure (WLTP) has replaced the New European Driving Cycle (NEDC). Regardless of the applied test procedure, it is currently still mandatory to state fuel consumption and CO2 emissions according to NEDC, hence stated values are determined based on the WLTP test procedure and are converted to NEDC for comparison purposes. Depending on your country, vehicle related taxes or other duties may be based on fuel consumption and CO2 emissions data which differs from that stated here. The provision of additional fuel consumption and CO2 emissions as determined according to WLTP is currently voluntary until their provision becomes mandatory by law.

Further information on specific fuel consumption and CO2 emissions of new passenger cars is provided by the ‚Leitfaden über den Kraftstoffverbrauch, die CO2-Emissionen und den Stromverbrauch neuer Personenkraftwagen‘ which can be obtained free of charge at all points of sale and from the Deutsche Automobil Treuhand GmbH (DAT) or online https://www.dat.de/co2/.